IP TSSC 01 SK Spring Compressor

SHOCK SPRING COMPRESSOR TSSC 01
	1 - SAFETY IS CRITICAL! MAKE SURE THE SHOCK IS SESCURELY HELD IN A VICE. We suggest TMVJ 065 Soft Vise Jaws.
	2 - Attach the Shock Spring Compressor to the shock. Use a bolt and nut through the eyelet.
	3 - Slide the opening in the foot around the shock shaft.
	4 - Close the safety pin.
	5 - Make sure the handle of the tool is turned perpendicular to the vise jaw faces. 6 - Pull down on the handle. 7 - Carefully remove the retaining circlip or collar. 8 - Detach the tool and remove the spring. Install in the reverse order.